Select Page

Device Connector IP55

Device Connector IP55

RCM Approval Pending

Vendor Neutral Bridge, Long Range Wireless Bridge

The Device Connector IP55 enables Ethernet devices to access wireless networks with unbreakable reliability.

Using our signal bonding technology, Ethernet devices can connect using the combined bandwidth of 2.4GHz and 5GHz frequency Wi-Fi in a single LAN connection.

The Device Connector is compatible with any access point, so you can just drop it in and go – no network reconfiguration or device upgrades needed.


Need to Connect to Wi-Fi?

Get the Coverage You Need Without Setup. Plug-and-Play.

Easily extend Wi-Fi coverage in minutes with Pepwave’s Device Connector IP55. The Device Connector gets your devices talking over a large area without wires or configuration headaches. And because it works transparently at Layer 2, the Device Connector is compatible with any access point.

Need More Reliability?

Turn your 2.4GHz and 5GHz Signals Into One Connection.

Normally, Wi-Fi devices will force you to choose between 5GHz or 2.4GHz. With the Device Connector IP55, you can have both. Simply connect your device to the Ethernet port and the device connector will combine 5GHz and 2HGz into a single reliable connection.

Jumping Between APs?

CarFi Fast Roaming. WAN Reliability with Wi-Fi Mobility*.

CarFi Fast Roaming, let your Device Connector IP55 seamlessly hop from AP to AP in a matter of seconds. Whether you’re commanding an emergency situation, coordinating a construction project, or keeping your warehouse stocked, CarFi Fast Roaming keeps everyone communicating at all times.

* Optional Software Upgrade


Bridge Mode
Router (NAT) Mode
Support for PPP, Static IP, DHCP

Multiple SSID
Transmit Power Adjustment

AP Security

Client Authentication
EAP Outer Authentication Identity
RADIUS Server with Certificate

Complete VPN Solution
Site-to-Site VPN
256-bit AES Encryption
Pre-shared Key Authentication
Dynamic Routing

Device Management
Web Administrative Interface
InControl Cloud Management
FusionHub Controller
SNMP v1, v2c and v3



Product Code: DCS-GN-IP55

Wi-Fi Interface: 802.11ac wave 2/ac/a/b/g/n Wi-Fi WAN and AP

Ethernet Ports: 3x GE

Enclosure: IP55 Outdoor Enclosure

Dimensions: 300 x 124 x 44.5 mm

Weight: 520 grams

Power Input: 802.3at PoE+ (56V Pepwave Passive PoE Input is Needed for full 1x 802.3at PoE+ LAN Output#)

Power Consumption: 22 W (max.)

Operating Temperature: -40° – 55°C

Humidity: 15% – 95% (non-condensing)

Certifications: FCC, CE, RoHS

Warranty: 1-Year Limited Warranty

Package Content: Device Connector IP55, Cable Tie

# PoE injector available separately.


Product Code: DCS-GN-IP55
Product Name: Device Connector IP55
Description: 802.11ac wave2/ac/a/b/g/n 1166Mbps layer 2 client bridge in waterproof IP55 outdoor enclosure. Manageable by InControl cloud management.


Product Code: ACW-510
Compatible With: DCS-GN-IP55
Description: Wall/pole mount with flexible ball joint for high-precision installation.

Product Code: ACW-109
Compatible With: DCS-GN-IP55
Description: 1x 56V/2.1A Power Supply and PoE License to Enable 802.3at PoE+ Output.


Why Rising Connection is using equipment designed and built by Peplink?

• Industry leader in both ISP & Data Bonding across multiple technology platforms
• Reliable hardware from entry level professional equipment through to advanced Enterprises solutions
• Worldwide supported and local support here in Australia by fully trained technicians
• Reliable and secure redundancy paths for mission critical sites
• Designed for maximum possible business uptime

This demonstrates to Rising Connection that you will have the Quality, Reliability and Product Support.