• Built for 5G: Omni-directional 4×4 MIMO mobile antenna for the best performance.

• Ultra wide bandwidth: Wide frequency range (600-6000MHz) supporting LTE and 5G connectivity.

• Wi-Fi: 2×2 MIMO dual band (2.4GHz & 5GHz) high gain omnidirectional antennas for local coverage.

• Robust design: IP68 rated, low profile and durable housing in Black or White color options.

• Easy installation: Simple panel, wall or pole installation for various applications.

• Public Safety and mission critical connectivity
• Mobile Healthcare
• Transportation Connectivity

• Antenna elements: 4 elements
• Cellular frequencies: 2.7dBi: 617-960MHz, 5.2dBi: 1710-2700MHz, 4.9dBi: 3400-4200MHz, 6.7dBi: 5000-6000MHz
• Cellular bands: LTE bands B1 to B86 (except B31, B72, B73, B87, B88), 5G bands n1 to n99
• VSWR: < 2.5 over 95% of the band
• Feed power handling: 10W
• Input impedance: 50 Ω
• Polarisation: Linear
• Ground plane: Not required#

Wi-Fi

• Antenna elements: 2 elements
• Peak gain & Frequencies: 5.0dBi: 2400-2500MHz, 7.5dBi: 5000-6000MHz
• VSWR: < 2.5
• Feed power handling: 10W
• Input impedance: 50 Ω
• Polarisation: Linear

GPS

• Frequency range: 1561-1602 MHz
• Peak gain & Frequencies: 0.5dBi@1575MHz, 1.6dBi@1602MHz
• VSWR: < 2 dB
• Output return loss: 10dB max
• LNA Gain: 28 ±3dB
• Noise figure: 1.5dB max at 3.3V
• Operating Voltage: 3.3V
• Power consumption: 8.5 ±2.5mA at 3.3V

Cable (GPS)

• Type: RG-174
• Loss: 3.4 dB/m @ 1000 MHz, 4.9 dB/m @ 1800 MHz
• Diameter: 0.1″ / 2.7mm
• Jacket: Half matt PVC, UV resistant
• Termination: QMA male, SMA male

Cable (LTE / 5G, Wi-Fi)

• Type: CFD-200
• Loss: 0.33 dB/m @ 900 MHz, 0.49 dB/m @ 2000 MHz, 0.55 dB/m @ 2500 MHz, 0.87 dB/m @ 5800 MHz
• Diameter: 0.2″ / 5.0mm
• Jacket: Half matt PVC, UV resistant
• Cellular Termination: QMA male, SMA male
• Wi-Fi Termination: RP-SMA male

Mounting

• Supported types: Panel, wall, pole
• Mounting hole: 1 11/16″ / 43mm
• Max panel thickness: 19/32″ / 15mm

Mechanical

• Product dimensions:Height: 2.28″ / 58mm (spigot not included) Diameter: 8.19″ / 208mm
• Packaged dimensions: TBD
• Radome material: UV stable PC

Package contents

• Antenna: Mobility 42G
• Mounting: Wall/pole mount, Double sided 3M adhesive pad (Diameter: 8.19” / 208 mm, Thickness: 0.08″ / 2 mm)

Environmental, compliance

• IP rating: IP68
• Operating temperature: -40° – 80°C
• Storage temperature: -40° – 80°C
• Compliance: RoHS, REACH, WHEE
• Wind Survivability: 137mph, 220 km/h
• Enclosure flammability: UL 94 HB
• Cable flammability: UL 758 (VW-1)
• UV resistance: UL 746C (F1 long-term UV exposure)
• Salt Spray: MIL-STD 810F/ASTM B117

# All measurements stated in this document were obtained without a ground plane.

 
EXTENSION CABLE

• Cover panel surface to protect the paint work. When drilling a hole, start with a small one, then increase it.
• Cut out diameter should be 1 11/16″ / 43mm. Maximum allowed panel thickness – 19/ 32″ / 15mm.
• After drilling, clean up the surface and apply some paint around the hole to prevent corrosion. Attach the antenna.

Why Rising Connection is using equipment designed and built by Peplink?

 
• Industry leader in both ISP & Data Bonding across multiple technology platforms
• Reliable hardware from entry level professional equipment through to advanced Enterprises solutions
• Worldwide supported and local support here in Australia by fully trained technicians
• Reliable and secure redundancy paths for mission critical sites
• Designed for maximum possible business uptime
 

This demonstrates to Rising Connection that you will have the Quality, Reliability and Product Support.

 
Trademarks and registered trademarks are the property of Rising Connection Pty Ltd, Peplink or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.